CIRKELSÅGAR BOMAR AL 400
Saw-disk's shift to cut is automatic. Angle cuts are both-sided in the range from 60°–0°–90°. Arm turning is manual. Setting up of angle cuts is done very easily directly from the place of service. Saw disk is placed on the turning console with the possibility of blocking, that is adjustable by 15° and is also equipped with angular scale. Material leans on adjustable desks of bearing bridge. Saw is by default equipped with two vertical clamping cylinders. One of them is from safety reason equipped with reverse valve in case that the air's pressure is decreased.
Semi-automatic circular saw for aluminium AL 400 is machine designed for cutting of profiled and in less common also full materials from aluminium alloys, copper and hard plastics with cooling in the pedestal.
- English manual
- CE declaration
- Saw disc
|Smallest diameter to cut:||[mm]||5|
|Saw disc dimensions: (L × H × W)||[mm]||400 × 30 × 3,6|
|Power||[V]||3 × 400 V / 3 × 230 V|
|Machine dimension (W × L × H)||[mm]||850 × 800 × 1440|